link to home page link to home page link to home page
link to service page link to products page link to supplies page link to careers page link to contact us page

Affordable, compact and convenient plain paper copying from a variety of originals.

This compact, affordable engineering copier provides the convenience of plain- paper copying from a variety of originals, including original drawings, bluelines, sepias, CAD plots and cut-and-tape composites onto bond, vellum or film. It produces sharp, permanent presentation-quality copies up to 20 feet long and 36 inches wide. And the dry xerographic imaging system means you can have a clean, comfortable working environment with no offensive odors.

Contact Us to request further product information.

Technical Specifications for Xerox 2515 Engineering Copier


  • Maximum Size: 36" x 20' long (single copy mode)
  • Minimum Size: 8 1/2 inches x 11 inches (portrait)
  • Types: Opaque, translucent and transparent documents
  • Thickness: Up to 1/8" thick


  • Warm-up time: Initial warm-up: 90 seconds (cold start-up); From power-saver standby: 25 seconds; Continuous copies: instantaneous
  • First Copy Out Time (FCOT): Less than 25 seconds D size (24" x 36")
  • Rated speed: 10 linear feet per minute
  • Copy throughput (multiple copy mode): 3 D size (24" x 36") per minute


  • Type: 20 lb. bond, Improved 20 lb. Zero Solvent vellum and 4 mil Zero Solvent film


  • 120 VAC/15 amp dedicated line


  • Weight: 180 lbs.
  • Height 13.5"
  • Width 55"
  • Depth 19"
  • Installation space: 103" x 79"

Agency approvals: UL and CSA

Product data subject to change without notice.