link to home page link to home page link to home page
link to service page link to products page link to supplies page link to careers page link to contact us page



Synergix Copy System 721p

721p Spec Sheet


Contact Us to request further product information.


Key Features:

  • 36 inch monochrome printer with 256 levels of grayscale
  • Up to 22 D/A1s per minute (ANSI/ISO)
  • 400 x 400 dpi
  • 4 rolls of on-line media (500ft), includes additional spindle for fast changes
  • 50 sheet tray for cut media (single sheet only for sizes greater than C)
  • AccXES controller or PlotWorks, or both
  • Supports up to 900,000 square feet (83,600 square meters) per month
  • Xerox DocuSharpTM print technology assures excellent image quality with clean diagonals and curves, crisp fine lines and smooth well-defined grayscales
  • ENERGY STAR® compliant

Quick Specifications:

Process/Imaging Xerographic LED
Photoreceptor Organic
Media Supply 4 rolls, 500 ft; Cut sheet: single sheet up to 36" x 48", 24" x 18" and smaller up to 50 sheets
Media Type Bond, Vellum, Film
Output Size Min 8.5" x 11", Max 36" x 20'
Resolution 400 dpi
Process Speed 9.4 ips, 240mm/sec
Throughput Up to 22 ANSI / 20 ARCH Ds, 11 ANSI/10 ARCH Es per minute
Power Requirements 50/60 Hz single phase; 220-240 VAC; 16 Amp
Weight Approx: 880 lbs
Dimensions W 54" H 37" D 39"
Finishing Optional: Catch Tray, 50 E / 100 D
Optional: Online Folder
Optional: High Capacity Stacker
Safety Certifications UL 1950, CNL C22.2 No. 950-M93, Low Voltage Directive 72/23/EEC, CE Marking Directive 93/68/EEC, FCC Part 15 Subpart B (Class A), ICES-003, Issue 3: 1997 (Class A), EMC Directive 89/366/EEC, ENERGY STAR
Energy Star As an ENERGY STAR partner, Xerox Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Warm up time Warm sleep: 90 seconds
Cold sleep: 6 minutes
First Copy Out 12 seconds
Reduction / Enlargement 25 to 400% in 0.1% increment
Output Selection Auto/manual roll selection and scaling
Concurrency Scanning/copying/printing; Printer interrupt key
Digital Retention Up to 999 copies from a set of at least 100 standard E size drawings
Sets Build Electronic collation; Forward; Reverse; Last job recall; Rescale and reprint without rescanning; 999 copies; Batch mode
Imaging Inverse, Mirroring, Transform, Rotation, 7 copy contrast levels
Image Quality Automatic dynamic background suppression; Automatic width detection of original
Copy Modes Line; Mixed; Photo
Resolution 400 x 400 dpi (monochrome), 400 x 600 dpi (color)
Copy/Scan Speed 7.3 ips at 400 dpi (copy)
4 ips at 400 dpi (scan)
8 ips at 200 dpi (scan)
Formats: TIFF, PDF, CALS
Color Scan-to-Net .5 ips at 400 dpi, 1.0 ips at 300 dpi
Formats: TIFF, JPEG
Scan-to-File Standard; Indexing Scan preview; Link to raster editor; Resolution selection: CALS, or PDF data format 1 bit per pixel black and white TIFF 6.0 data format 8-bit per pixel gray scale 8-bit per pixel indexed color using either threshold or error diffusion choice of 4 color palettes (24-bit per pixel true color or JPEG data format, 24-bit per pixel true color, three quality compression settings), TCP/IP Ethernet interface
Client Software Document Retrieval Tool for Windows 95/98/2000/NT and Solaris
Input Min 4 1/2" x 51/2"
Max 42" (only captures 36" of image) x 100'
Document thickness up to 1/2"
Edge / Center Adjustment Lead and trail edge adjust / center alignment
Power Requirements 50/60 Hz, single phase
100-120 VAC 4 Amp or 200-240 VAC 2 Amp (auto sensing)
Weight Scanner: 105 lbs (48kg)
Scanner Stand: 45 lbs (21kg)
Dimensions W 53" H 45" D 16" with stand
(W 134.6 cm, H 114.3cm, D 40.6 cm)
CPU Power PC
Power 110/220 V
Memory 256 MB standard; expandable up to 512 MB
Hard Disk Standard - 40 Gb IDE ATA100
Data Formats HP-GL, HP-GL/2; HP-RTL, CGM (Level 1 with ATA ext.); C4; FileNET: XES 150 Emulation; Versatec Data Standards (VRF, ordered vector, blocked raster, compacted raster): CalComp 906/907/951/PCI; TIFF 6.0; NIRS; CALS 1 & 2; VCGL; Compression types (for application raster formats): CCITT G4, G3-1D, G3-2D, Packbits, RLE, Seed Row, Adaptive; JPEG
Optional Adobe PostScript 3 with PDF support
Interfaces Standard: Serial RS-232, IEEE 1284 Bi-directional Centronics; Ultra wide SCSI; 10/100 Ethernet (TCP/IP) supports 10/100 BaseT
Optional: External print server
Network Protocols Standard: TCP/IP with lpr/lpd
Optional: Novell, Ethertalk, NetBEUI and others supported through external print server
Client Software ADI and HDI print drivers for AutoCAD R14, AutoCAD 2000, 2000i, 2002;
Print drivers for Windows 95/98/2000/NT/XP;
Web Printer Manager Tool using Netscape Navigator 4 or Microsoft IE 4 or later;
Document Submission Tool for Windows 95/98/2000/NT/XP and Solaris
Optional: Adobe PostScript 3 drivers for Windows 95/98/2000/NT/XP
Server Software PlotWorks V5.5 or greater
Supported Interfaces 2- AccXES Controller via a network connection, PLP Scorpion Interface Card
Client Software PlotWorks Client V5.5 or greater
PC Server Dell GX260, Pentium 4, 2.4GHz, P4, 533FSB, Windows XP, Professional VersiNTFS
Power 100-120V (2 outlets required)
Memory 512Mb Standard (1x512Mb DIMM) (2GB max)
Hard Disk Standard: 20 Gb EIDE, 48x IDE CD-ROM Drive
Data Formats HP-GL, HP-GL/2; HP-RTL, CalComp 906/907, CALS Type 1, TIFF 3 and 4 (full color support), BMP, XIF, PCX, VRF, JPG, DCX, DGN, CGM, PDF, AutoCAD.dwg, AutoCAD.dwt, PostScript, Reprodesk/Apprentice (JOB, VIC, PEN and SET files)
Interfaces Serial RS-232 (1, Integrated) IEEE 1284 Bi-directional Centronics (1, Integrated) 10/100/1000 BaseT Network Interface (1, Integrated) Modem, V.92, Data/Fax Modem (1, PCI)
Optional - Ultra wide SCSI (2, PCI), IEEE 1394, FireWire (1, PCI)
Network Protocol Standard: TCP/IP
PCI Slots 4
Available PCI Slots 3 (Modem requires 1)

Product specifications subject to change without notice.